Terminal Linked To Ecr Using Ethernet Networking - Moneris iCT250 Getting Starded Manual

1.8.3 Terminal linked to ECR using Ethernet Networking

1. Begin at the REINITIALIZATION REQUIRED screen.
2. Press the key twice.
The ENTER ADMIN CODE entry screen appears.
3. Key in 52, and press the green
The SEMI COMM CFG menu appears.
4. Scroll down to ETHERNET, and press the green
The ETHERNET SETUP menu appears.
Note: The terminal will automatically use the static IP values that you entered when you
configured the terminal-to-host communication parameters.
5. Press the red key twice.
The REINITIALIZATION REQUIRED screen appears.
6. Go back to Read this first: Overview procedures on page 1 (continue at step 7).
key.
key.
1. Overview and configuration
15