Moneris iCT250 Getting Starded Manual page 14

8. Press the green key to select COMMS TYPE.
The COMMUNICATION TYPE menu appears.
9. Scroll down to ETHERNET, and press the green
The ETHERNET SETUP menu appears.
10. Press the red key once.
The PLEASE WAIT message appears.
11. When the TCP HOST CONNECTION OK PRESS OK message appears, press the green
Note: The Ethernet icon
 If the HOST CONNECTION FAILED message appears, press the green
to do troubleshooting).
 If the TCP CONNECTION FAILED message appears, press the green
do troubleshooting).
12. When the REINITIALIZATION REQUIRED screen appears, do one of the following:

If you wish to use dial backup (when Ethernet is unavailable), follow the instructions on
page 13.
 If you do not wish to use dial backup, go back to Read this first: Overview procedures on
page 1 (continue at step 6.b).
10 iPP320 Getting Started Guide for the POSPAD Application
key.
at the top of the screen will be coloured green.
key.
key (see page 29
key (see page 29 to