Chapter 3. Setting Up; Switch Settings - Renesas M30220T-PRB User Manual

Chapter 3. Setting Up

With this product, it is necessary to set the following according to your application system.

3.1 Switch Settings

It is necessary to set the switches of the FLX64-PRB for debugging according to the target system.
Figure 3.1 shows the positions of the switches of the FLX64-PRB, and Table 3.1 shows the switch
settings.
Figure 3.1 Positions of the switches and their factory-settings
Table 3.1 Switch settings of FLX64-PRB
• X /X pins for the target system
CIN COUT
• Mounting the A-D conversion bypass capacitor
Function
Switch No.
Selecting
JP1
X
CIN
Selecting
JP2
X
COUT
As this switch is not used for M30220T-PRB,
X
PORT
NC
Used when X is connected to
COUT
the target system
(Factory-setting)
( 14 / 36 )
Switch setting
is always selected.
CIN
Used when X
connected to the target system
PORT
NC
is not
COUT