M306NKT-EPB User's Manual
2.10 Switch Settings
2.10.1 A/D Conversion Bypass Capacitors
There is a foot pattern on the M306NKT-EPBM board for mounting bypass capacitors for the A/D conversion circuit near the
MCU. Mount suitable bypass capacitors as occasion demands. Figure 2.16 shows where they are installed and the
configuration of this product.
Component side of the M306NKT-EPBM
6NK
V
-AV
REF
SS
V
REF
C2
AV
-AV
CC
SS
AV
CC
C1
Figure 2.16 Foot pattern for A/D conversion bypass capacitors and the configuration of this product
Note on the A/D Converter:
Because a package converter board and other devices are used between the evaluation MCU and the user
system, the A/D converter operates differently from that of an actual MCU. Make the final evaluation of the
A/D converter with an actual MCU.
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006
bypass capacitor
AV
SS
bypass capacitor
AV
SS
IMPORTANT
2. Setup
Page 40 of 104