Chapter 3. Setting Up
With this product, it is necessary to set the following according to your target system.
3.1 Switch Settings
It is necessary to set the switches of the M30220TF-PRB and FLX64-PRB for debugging according
to the target system. Figure 3.1 shows the positions of the switches of the M30220TF-PRB and
FLX64-PRB, and Table 3.1 shows the switch settings.
Figure 3.1 Positions of the switches and their factory-settings
• CNVSS pin to the target system
• X
/X
pin to the target system
CIN
COUT
• Mounting the A-D conversion bypass capacitor
( 18 / 54 )