Enclosures; Removing And Mounting The Front Plate - R&S SpycerNode 2U12 User Manual

SpycerNode
2U Enclosures

Removing and Mounting the Front Plate

On all 2U enclosures it is necessary to remove the front plate to access the
drives.
Removing the Front Plate
Perform the following steps:
•
Pull the front plate on both sides simultaneously from the enclosure.
Mounting the Front Plate
Perform the following steps:
•
Push the front plate on both sides simultaneously towards the enclosure.
User Manual | 2902.3266.02 - 08
Maintenance
2U Enclosures
99