Rsi Troubleshooting; Logs; Error Codes - R&S SpycerNode 2U12 User Manual

SpycerNode

RSI Troubleshooting

This section provides information on what to do in case an RSI installation
fails.

Logs

Logs of the installation process are created on the systems involved. The
logs are located under /var/log/rohde-schwarz/swupdate/rsi-
installer_<YYYY-MM-DD>__<HH-MM-SS>.txt.

Error Codes

If errors occur during the installation, the RSI will show error codes displayed
on the monitor, without having to open the log files. Some errors can be
rectified on site while others require to contact the R&S support department
for assistance. If the latter is the case, please provide the code number of
the error(s) in question.
Error code
5
30
31
32
33
34
35
36
User Manual | 2902.3266.02 - 08
Message
Installer already running!
Failed unpacking Windows client
installers!
Failed importing new packages!
Failed updating!
Failed installing meta package!
Image version is 'X', must be at least
'Y'!
Machine UUID '/etc/opt/rohde-
schwarz/machine-uuid' is missing!
System configuration '/etc/opt/rohde-
schwarz/swupdate.conf' is missing!
Working with the R&S Installer (RSI)
RSI Troubleshooting
Description & possible solu-
tion
-
Disk volume is full or installa-
tion packages are defective.
Disk volume is full or installa-
tion packages are defective.
Disk volume is full or installa-
tion packages are defective.
The meta package of the
product is defective or required
packages are missing.
Operating system image is not
compatible with the RSI.
Possible cause is the attempt
to install a new RSI on an
obsolete/outdated image.
Installation failed on the
system. Try executing fbms-
setup.sh.
Installation failed on the
system. Try executing fbms-
setup.sh.
125