R&S SpycerNode 2U12 User Manual page 40

Installation
Mounting the System into a Rack
40
Risk of injury.
An unpopulated enclosure can weigh up to 50 kg
and more.
Do not try to lift it by yourself. Never attempt to
lift the enclosure when populated with drives.
Till removing the device, from the rack beware
that the enclosure is not permanently
connected with the rack.
Electronic discharge
Computer hardware contains components that are sensitive
to electrostatic discharge. If you touch them without precau-
tionary measures, they can be destroyed.
Ensure that you have fitted and checked a suitable anti-
static wrist or ankle strap and observe all conventional
ESD precautions when handling modules and compo-
nents. Avoid contact with backplane component and
module connectors, etc. ESD damage is not covered by
warranty.
Rail Kit Adjustment Range: Suits a 1 metre deep rack within Rack
Specification IEC 60297.
Inside of the front post to inside of the rear post: 713 mm - 884 mm
SpycerNode
User Manual | 2902.3266.02 - 08