Configuration
Installing the Spectrum Scale Client
Installing the Spectrum Scale Client
This section describes the Spectrum Scale client installation on your system.
The following topics are covered:
● Installing under Linux (page 72)
● Installing under Windows (page 73)
● Adding a Native Spectrum Scale Client to an Existing Cluster (page 80)
● Removing a Native Spectrum Scale Client (page 81)
Installing under Linux
Perform the following steps:
1.
In the R&S
installer, and download the corresponding SSFS installer package.
2.
Unpack the corresponding archives locally.
72
®
Device Manager navigate to Maintenance > Software
SpycerNode
User Manual | 2902.3266.02 - 08