Operating Panel (5U Enclosure) - R&S SpycerNode 2U12 User Manual

SpycerNode

Operating Panel (5U Enclosure)

Operating panel for 5U Enclosure
LEDs
Unit ID Power Module
dis-play (green/ fault
amber) (amber)
X On
X On
X On
X On
X On
X On
User Manual | 2902.3266.02 - 08
Unit ID display
ID switch
Power on / Standby
Module fault
Logical status
Drawer 1 fault
Drawer 2 fault
Unit ID display Displays the enclosure identification number (for use with
multiple enclosure systems), but can be configured by the ID
switch.
ID switch Used to set the Unit ID display (refer to chapter "Setting the
Unit Identification Number" on page 57 for details).
LED Fore more information see LEDs.
Logical Drawer
status 1 fault
(amber)
Off Off Off
On X
On X Off
On X Off
F X Off
F X Off
Drawer 2 Associated
fault LEDs or
Alarms
Off
X X Single beep,
then double
Off PSU fault
LEDs, fan fault
LEDs
Off SBB module
LEDs
Off
Off Module status
LED on SBB
module
Product Description
The Front of the System
LEDs
Status
Power on, all functions
good
Operating panel power
on (5s) test state.
Any PSU fault, fan fault,
over or under tempera-
ture
Any SBB module fault
Enclosure logical fault
(eg VPD config. error)
Unknown (invalid or
mixed) SBB module
type installed, I2C Bus
failure (inter SBB
comms) JBOD VPD
configuration error
21