Table of Contents
Advertisement
Maintenance
2U Enclosures
Activating the Anti-tamper Locks
Perform the following steps:
1.
Carefully put the lock key provided into the cutout in the handle.
2.
Position the key into its socket.
3.
Rotate the key in a clockwise direction until the indicator is visible in the
aperture beside the key.
4.
Remove the key.
The Anti-tamper lock is successfully activated.
Replacing a Drive Carrier (2u24)
Identifying a Broken Disk Carrier
The procedure is basically the same as for 5U enclosures.
Perform the following steps:
•
Follow the instructions in chapter "Identifying a Broken Drive Carrier" on
page 114.
106
Electronic discharge
Observe all conventional ESD precautions when handling
modules and components.
Avoid contact with midplane components and module
connectors.
SpycerNode
User Manual | 2902.3266.02 - 08
Advertisement
Table of Contents
