Table of Contents
Advertisement
SpycerNode
The drive carrier is successfully installed.
Replacing a Cooling Module
Removing a Cooling Module
Perform the following steps:
1.
Identify the cooling module to be removed. If the module has failed, the
fan fault LED will be lit amber.
User Manual | 2902.3266.02 - 08
Overheating damage
An incorrect airflow can damage components.
The drawers must be populated with drives in whole
rows at a time (there are 3 rows of 14 drives per
drawer). The minimum number of drives in an enclosure
is 14, the number of rows must not differ by more than
1 between top and bottom drawers and the rows should
be populated from the front to the rear of the enclosure.
Before removing a module, make sure you have a replacement
module to insert.
Maintenance
5U Enclosures
117
Advertisement
Table of Contents
