R&S SpycerNode 2U12 User Manual page 108

Maintenance
2U Enclosures
Installing a 2.5-inch Drive Carrier
Perform the following steps:
1. Release the carrier handle, by pressing the latch in the handle down-
wards and insert the carrier into the enclosure in the vertical position.
2. Slide the carrier fully into the enclosure until it is stopped by the clamping
lever on the bottom of the carrier.
108
Make sure that the carrier is positioned so that the drive is on the
left side and the handle opens from the top.
SpycerNode
User Manual | 2902.3266.02 - 08