Table of Contents
Advertisement
SpycerNode
Perform the following steps:
1.
Release the drive carrier handle, by depressing the latch in the handle.
2.
Put the drive carrier into the enclosure. Make sure that the drive carrier is
in a position so that the drive points up and the handle opens from the
left.
3.
Slide the drive carrier fully into the enclosure.
4.
Cam the drive carrier home. The camming foot on the carrier will engage
into a slot in the enclosure. Continue to push firmly until the handle fully
engages. A click should be heard as the latch engages and holds the
handle closed.
The 3.5-inch carrier is successfully installed.
User Manual | 2902.3266.02 - 08
Maintenance
2U Enclosures
105
Advertisement
Table of Contents
