Configuration
Initial Setup
11.
Define a virtual IP address for the export services (e.g. via Samba). It is
already preset to the same subnet domain, thus you have to provide only
the last three digits. If required, you can also change the network inter-
face for the export services.
12.
A summary is presented in the last step with the option to make changes
to the file system and virtual IP configuration settings. Press Apply to
system to confirm the settings.
Completing the Easy Setup Wizard will provide the basic settings required to
start operating your system. Further settings options are available through
the R&S®Device Manager after the initial setup.
13.
On the main page of the Device Manager select the corresponding
system.
70
SpycerNode
User Manual | 2902.3266.02 - 08