Table of Contents
Advertisement
SpycerNode
9.
In the next installation phase, the file system configuration is carried out.
First, the metadata drives and the installed storage capacity are
displayed.
Zone 1
Zone 2 / Zone 3
In this step you have the option to restart the entire setup procedure by click-
ing the "Restart wizard" button.
10.
In the next step you select the interface for your storage network connec-
tion.
Network interface (IP) Select the network interface for your file system. The
File system name
Linux mount point
Windows drive letter
User Manual | 2902.3266.02 - 08
Shows the number of metadata drives, the drive type, the
capacity and RAID level.
Shows the installed storage drives type, their capacity and the
level of RAID protection. Each zone represents a single drive
set which consists always of 30 drives. A system with half the
capacity will have only one zone populated.
connection is usually established via the 100Gbit (option-
ally 200Gbit) interfaces.
Provide a name for your file system.
Define the mount path for this file system at your
connected Linux native clients.
Define the drive letter designation for the your file system
at your connected Windows native clients.
Configuration
Initial Setup
69
Advertisement
Table of Contents
