Using Static Ip - R&S SpycerNode 2U12 User Manual

SpycerNode

Using Static IP

Perform the following steps:
1. Connect port
2. Change the IP for the connected network interface in the network
settings of your PC/Mac to „10.0.0.1".
3. Enter the static IP in the Chrome web browser to open the R&S
Manager on your local system. (i.e.
4. Locate the serial number of the device which is to be found at the rear of
system.
User Manual | 2902.3266.02 - 08
1 0 2 to a PC/Mac.
ENP S F
enp1s0f2
Static 10.0.0.4
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway:
sno-xxxxxx-X
10 . 0 . 0 . 1
255 . 255 . 255 . 0
. . .
http://10.0.0.4).
Configuration
Initial Setup
®
Device
65