Table of Contents
Advertisement
SpycerNode
2U Enclosures
Perform the following steps:
1.
Refer to the label on rail (left hand rail only shown for clarity).
2.
To facilitate access, remove the door from the rack.
3.
Lift the enclosure and position the rear on the rack guide rails.
4.
Slide the enclosure fully into the rack, and secure with screws in the
mounting flanges.
SpycerNode is fully mounted into the rack.
User Manual | 2902.3266.02 - 08
Installation
Mounting the System into a Rack
41
Advertisement
Table of Contents
