Table of Contents
Advertisement
SpycerNode
Removing a Drive Carrier
Perform the following steps:
1.
Identify which drawer contains the drive to be replaced. If the drive
number is known, the plan in the following figure can be used. If the drive
has failed, the drive fault LED will be lit amber on the relevant drawer.
2-01
2-02
2-03
2-04
2-05
2-06
2-07
2-08
2-09
2-10
2-11
2-12
2-13
2-14
2.
Open the relevant drawer using the instructions in chapter "Opening a
Drawer" on page 112.
3.
Locate the drive to be replaced, either by using the drive plan in the
figure in step 1 or by looking for the amber LED on the drive that indi-
cates a fault.
4.
Push the drive carrier latch in the direction to unlock the drive.
5.
Pull the drive upwards and out of the drawer.
The disk drive carrier is successfully removed.
User Manual | 2902.3266.02 - 08
Drawer 2 (bottom)
2-15
2-29
2-16
2-30
2-17
2-31
2-18
2-32
2-19
2-33
2-20
2-34
2-21
2-35
2-22
2-36
2-23
2-37
2-24
2-38
2-25
2-39
2-26
2-40
2-27
2-41
2-28
2-42
Overheating damage
An incorrect airflow can damage components.
If you are not going to replace the drive immediately,
close the drawer (see chapter "Closing a Drawer" on
page 113) so that correct airflow and cooling are main-
tained in the enclosure.
Drawer 1 (top)
1-01
1-15
1-29
1-02
1-16
1-30
1-03
1-17
1-31
1-04
1-18
1-32
1-05
1-19
1-33
1-06
1-20
1-34
1-07
1-21
1-35
1-08
1-22
1-36
1-09
1-23
1-37
1-10
1-24
1-38
1-11
1-25
1-39
1-12
1-26
1-40
1-13
1-27
1-41
1-14
1-28
1-42
Maintenance
5U Enclosures
115
Advertisement
Table of Contents
