Maintenance
5U Enclosures
Replacing a Drive Carrier
Identifying a Broken Drive Carrier
Perform the following steps:
1.
Open the R&S Device Manager as described in chapter "Using the
R&S®Device Manger" on page 84.
2.
Opens the monitoring interface as described in "Monitoring Disk Arrays"
on page 92.
3.
Select Replace Broken Disks... in the context menu.
4.
Follow the instructions of the wizard.
114
A defect disk array will be indicated.
The Fix Procedure wizard opens.
SpycerNode
User Manual | 2902.3266.02 - 08