R&S SpycerNode 2U12 User Manual page 120

Maintenance
5U Enclosures
Installing a Power Supply Unit
Perform the following steps:
1. Rotate the power supply unit so that the red release latch and handle are
on the left-hand side.
2. Slide the power supply unit into its slot until the latch clicks home. The
enclosure will automatically detect the new unit.
120
Overheating damage
An incorrect airflow can damage components.
The power supply unit module bay must not be empty
for more than two minutes while the enclosure is
powered.
SpycerNode
User Manual | 2902.3266.02 - 08