Table of Contents
Advertisement
SpycerNode
Identifying a Broken Disk Carrier
The procedure is basically the same as for 5U enclosures.
Perform the following steps:
•
Follow the instructions in chapter "Identifying a Broken Drive Carrier" on
page 114.
Removing a 3.5-inch Drive Carrier
Perform the following steps:
1.
If the anti-tamper lock has been activated, de-activate it by locating the
key into its socket and rotating it counter-clockwise until the indicator is
no longer visible in the aperture beside the key. See chapter "Activating
the Anti-tamper Locks" on page 106.
2.
Press the latch in the handle towards the handle hinge to release the
carrier handle.
User Manual | 2902.3266.02 - 08
Disk damage
Damage can occur to a drive if it is removed while it still
spins.
We recommend that you perform all steps of the
following procedure to make sure that the drive has
stopped prior to removal. Avoid vibrations after pulling
out.
Maintenance
2U Enclosures
103
Advertisement
Table of Contents
