Changing The Energy Saver Mode Setting - Canon ImageRunner 5000 Series User Manual

Changing the Energy Saver Mode Setting

You can change the Energy Saver mode that reduces the power consumed by the machine.
NOTE
• The default setting is "–10%".
1
Call up the desired screen as follows:
Additional Functions
key
2
Select the [-10%], [-25%], [-50%] or [None] key,
and press the [OK] key.
NOTE
• The approximate energy savings figures for each
mode and the approximate delay times from power
ON to ready to print status are listed below.
- –10% mode : 10% less power (approx. 50 sec.)*
- –25% mode : 25% less power (approx. 90 sec.)*
- –50% mode : 50% less power (approx. 180 sec.)*
- None : 2% less power (approx.
* The figures in parenthesis ( ) show the approxi-
mate time it takes for the machine to return to the
ready to print status.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
6-14 Setting Specifications that are Common to Each Function (Common Settings)
0 sec.)*
Energy Saver Mode