Advertisement
5
Press the [Store Name] key.
6
Select the memory key ([M1] to [M9]) for which
you want to assign a name, and press the
[Next] key.
NOTE
• The mode memory key where scan settings are
already stored shows a small, black square [ ] in
the lower right corner of the key.
• If you selected a memory key to which a scanning
mode has already been stored, its settings are dis-
played.
7
Enter the new name, and press the [OK] key.
NOTE
• For details on how to enter characters on the touch
panel display, see "Entering Characters on the
Touch Panel Display," on p. 10-6.
• The maximum number of characters you can
assign for the name is 10.
• If you press the [OK] key without any characters
entered, the name of the memory key will revert
back to its default setting, e.g. [M1] or [M2].
8
Press the [OK] key.
The display returns to the Special Features
screen.
Scanning Originals into a Box
4-55
Advertisement
Chapters
