Advertisement
Original Scanned Using the Feeder Becomes Dirty (Feeder
Cleaning)
If your originals have black streaks or appear dirty after feeding them in the feeder caused by the
pencil powder etc. on the roller, perform the Feeder Cleaning.
Cleaning is done by repeatedly feeding blank papers though the feeder.
NOTE
• The Adjustment/Cleaning screen is made up of several screens. Use the [
desired screen and make the required settings.
• When the [
] or [ ] key should be pressed, the indication
• It takes about 10 seconds to clean the feeder.
1
Call up the desired screen as follows:
Additional Functions
key
2
Place 10 blank LTR-size paper in the feeder,
then press the [Start] key.
NOTE
• To cancel Feeder Cleaning, press the [Cancel] key.
When the feeder is being cleaned, the message
on the right appears in the touch panel display.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
8-30
Routine Cleaning
] and [ ] keys to scroll to the
is displayed in this manual.
Feeder Cleaning
Advertisement
Chapters
