Advertisement
4
Select the size of the book when opened, and
press the [Next] key.
NOTE
• To select A or B series paper size, press the [A/B-
size] key.
5
Press each key ("Top", "Left", "Center",
"Right", and "Bottom") and set the desired
book frame erase width using the [–] or [+] key,
and press the [OK] key.
The values set here are specified independently
around the original. To set a value uniformly
around the original, press the [Adjust All At Once]
key.
NOTE
• When entering values in millimeters, you can use
the Numeric keys (
control panel.
• If you enter a value outside the setting range, a
message prompting you to enter the appropriate
value will appear on the screen.
• Even when you enter the values with the Numeric
keys (
-
), you can change the values using the
0
9
[–] or [+] key.
• If you want to enter values in millimeters, press the
[mm] key.
• The default settings are 3/8" (10 mm) for "Center"
and 1/8" (4 mm) for "Top", "Left", "Right" and "Bot-
tom".
When you select the [Adjust All At Once] key:
Press the [Sides] and [Center] key to set the
desired frame erase width using the [–] or [+]
key, and press the [OK] key.
Clear
-
) and the
key on the
0
9
C
Erasing Shadows and Frame Lines from Copies (Frame Erase)
3-29
Advertisement
Chapters
