Interrupting The Current Job To Make Priority Copies (Interrupt Mode) - Canon ImageRunner 5000 Series User Manual

Interrupting the Current Job to Make Priority
Copies
(Interrupt Mode)
The Interrupt mode enables you to interrupt the reserved or current job long enough to make other
priority copies. This mode is useful when making a rush copy during a long copy job.
IMPORTANT
• When making interrupt copy while the user restrictions are enabled with the control card, make copies
without exchanging the control cards.
NOTE
• You can make interrupt copies if the machine is ready to scan.
• You can set the modes for the Interrupt copy even while an original is being scanned into memory or into
a box.
1
Interrupt
Press the key.
Interrupt
The key remains constantly lit.
NOTE
• When you want to copy after changing the
Department ID while the Department ID Man-
agement is enabled, press the
enter the Department ID and Password. (See
"Entering the Department ID and Password,"
on p. 10-4.)
• Even when you press the
being output will not be interrupted until the inter-
rupt copy starts.
2
Place your original, then set the necessary
copy mode.
NOTE
• You can cancel the Interrupt mode by pressing the
Interrupt
key.
• You can cancel only the copy mode by pressing the
Reset
key. (The Interrupt mode will not be can can-
celed.)
key and
ID
Interrupt
key, the job currently

Interrupting the Current Job to Make Priority Copies (Interrupt Mode)

1
Guide
4
?
Additional Functions
7
Interrupt
ID
Interrupt Mode
Processing
/Data
2 3
5 6
8 9
Clea
0
C
Error
5-3