Advertisement
• Avoid locations where ammonia gas is
emitted.
• Avoid locations near volatile flammables,
such as alcohol or paint thinner.
• Avoid locations which are subject to vibra-
tions.
For example, avoid installing the machine on
unstable floors or stands.
• Avoid rapid changes in temperature.
If the room in which the machine is installed is
rapidly heated from a low temperature, con-
densation may form inside the machine. This
can adversely affect print quality or result in an
inability to obtain print images.
• Avoid installing the machine near comput-
ers or other precision electronic equipment.
Electrical interference and vibrations generated
by the machine during printing can adversely
affect the operation of such equipment.
• Avoid installing the machine near televi-
sions, radios or other similar electronic
equipment.
The machine might interfere with sound and
picture signal reception, etc. Plug the machine
into a dedicated power outlet and maintain as
much space as possible between the machine
and other electronic equipment.
• About the machine's fixing stoppers.
- Do not remove the machine's fixing stoppers after
the machine has been installed.
- If you put weight on the front of the machine while
the paper drawers or units within the machine are
pulled out all the way, the machine might fall for-
ward. To prevent this from happening, make sure
that the machine's fixing stoppers are set in place.
Installation Precautions
29
Advertisement
Chapters
