Advertisement
When you select the [Rotate] key:
When the Automatic Paper Selection is set,
press the [Next] key. Then select the LTR or
LTRR-size paper, and press the [OK] key.
NOTE
• Press the [OK] key after selecting the [Rotate] key
in the following case:
- Available paper size is selected manually.
- Available paper size is loaded for both horizontal
and vertical direction.
- Drawer Eligibility for APS/ADS of the paper
drawer loaded with available paper size is set to
"On".
When you select the [Hole Punch] key:
Punches holes (2 or 3 holes) in the printed
sheets.
IMPORTANT
• The machine automatically selects the type of hole
punch (2 or 3 holes) depending on the selected
paper size.
- 2 holes: LGL/ LTRR
- 3 holes: 11"x17"/ LTR
• You cannot punch holes in STMTR-size paper.
• Holes cannot be punched in transparencies, trac-
ing papers, labels, and 3-hole punch.
5
Press the [Start Print] key.
If there is a current job or a previously reserved
job, the machine will start printing after that job is
completed.
(See "Printing Documents Stored in the Box," on
p. 4-6.)
NOTE
• To cancel the setting, press the [Finisher] and
[Cancel] keys in that order.
• To cancel the settings, press the [Initial Settings]
key. (The machine returns to the standard mode of
the Local Printing.)
• When you press the
the Box selection screen.
4-66
Printing a Document Stored, in a Box after Changing the Settings
Reset
key, the display returns to
Advertisement
Chapters
