Orientation of Originals
You can place originals vertically or horizontally. Always align the top edge of your original with the
back edge of the platen glass or the feeder.
NOTE
• If the top edge of the original is not aligned with the back edge of the platen glass, prints may not be made
correctly depending on the mode you have set.
• LTR/ STMT-size originals can be placed vertically or horizontally. However, the scanning speed for hori-
zontally placed originals is somewhat slower than that for vertically placed originals. You can place origi-
nals horizontally when printing with Preset Zoom mode, such as LTR→11"x17". (Horizontally placed LTR/
STMT-size originals are referred to as "LTRR/ STMTR".)
• 11"x17"/ LGL-size originals must be placed horizontally.
Vertical placement
Vertical placement
1-12
Placing Originals
[Platen glass]
Place the original
face down.
[Feeder]
ABC
Place the original
face down.
Horizontal placement
ABC
Horizontal placement