Advertisement
Adding Job Separator Sheets, Front and Back Covers to
Printed Sets (Cover/Job Separator)
When you select multiple documents and set the Merge Documents mode, you can program the
machine to automatically add front and back covers, or job separator sheets to divide each
document, using a different type of paper stock from which is used for the main text.
IMPORTANT
• You can set this mode only when you select multiple documents and set the Merge Documents mode.
(See "Printing Multiple Documents as One Document (Merge Documents)," on p. 4-75.)
• In the Cover/Job Separator mode, combined use with the Non-collate, Group, Offset Group, Memory Col-
lating, Memory Grouping, and Booklet modes cannot be set.
• You cannot print on front covers, back covers, or job separator sheets.
• Stapling is not possible when the total number of output papers including insertion sheets exceeds 30
sheets (for 11"x17"/ LGL/ LTRR size) or 50 sheets (for LTR size).
1
Specify the desired documents following procedure below.
Select the desired box number, then the desired documents
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Press the [Change P Settings] key.
3
Press the [Merge Documents] key.
NOTE
• The [Merge Documents] key only appears when
you select multiple documents.
• When you press the [Initial Settings] key, the docu-
ment recorded from a personal computer returns to
the former settings and the scanned document
returns to the standard mode of the Local Printing.
Printing a Document Stored, in a Box after Changing the Settings
Cover/Job
Separator
4-69
Advertisement
Chapters
