Advertisement
Self-diagnostic (Error) Display
Self-diagnostic (error) messages appear in the touch panel display at the following times:
• When printing cannot be performed because of an operational error.
• When you need to make a judgment or take some action during scanning or printing.
If a self-diagnostic message appears, follow the instructions in the touch panel display.
Message/ Cause
Add paper.
The machine has run out of paper. No more prints
can be made.
The paper drawer is not correctly inserted.
Load LTR-size paper.
The paper drawer loaded with the best paper size
selected by the Automatic Paper selection is not
inserted into the machine.
Return page 1 to the top, and then
press the Start key.
Scanning was stopped due to a problem with the
Feeder.
8-32
Self-diagnostic (Error) Display
Remedy
Load paper.
(See "Loading Paper," on p. 7-2.)
Insert the paper drawer as far as it will go.
(See "Loading Paper," on p. 7-2.)
Load the indicated paper size in a paper drawer.
Start
If you press the
key while this message is
displayed, print will be made with the currently
selected paper size.
If the message remains even when the indicated
paper is loaded, set the Drawer Eligibility of that
paper drawer to On . (See "Setting a Paper
Drawer for Auto Paper Selection/Auto Drawer
Switching," on p. 6-10.)
Arrange the originals in page order with the first
page on top. Place the originals back in the Feeder
original supply tray, then press the
Start
key.
Advertisement
Chapters
