Setting Device Information - Canon ImageRunner 5000 Series User Manual

4
Press the [Done] key.
Repeat this until the screen on the right appears.
For details on how to enter the Department ID and
Password, see "Entering the Department ID and
Password," on p. 10-4.

Setting Device Information

You can set the name of this machine and the place where it is located.
1
Call up the desired screen as follows:
Additional Functions
key
NOTE
• When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing the [System Settings] key. Then, press the
2
Press the [Device Name] and [Location] keys,
then enter the name of this machine and the
location where this machine is placed. Then
press the [OK] key.
NOTE
• For details on how to enter the characters, see
"Entering Characters on the Touch Panel Display,"
on p. 10-6.
• The maximum number of character which can be
entered is 32.
• To cancel storing, press the [Cancel] key.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
6-72 Setting Specifications of the System Management ID (System Settings)
Device Informa-
tion Settings
key.
ID