Selecting The Copy Paper Size (Paper Select); Automatic Paper Selection (Auto) - Canon ImageRunner 5000 Series User Manual

Selecting the Copy Paper Size
NOTE
• When copying an original onto the same paper size at a 100% copy ratio, the periphery of the original may
be cut slightly on the copy. For details of the size of the non-image areas, see "Non-image areas" in the
"Specifications," on p. 11-3.
• If you set the Entire Image mode, the copied image is automatically reduced slightly based on the copy
paper size and copy image size. As a result, the entire original image is reproduced on the copy paper
without its periphery being cut off. (See "Slightly Reducing Images to Prevent the Original Periphery from
Being Cut (Entire Image)," on p. 2-22.)

Automatic Paper Selection (Auto)

NOTE
• "Auto" is the Standard mode setting.
1
Place your originals and press the [Paper
Select] key.
2
Select the [Auto] key, and press the [Done]
key.
(Paper Select)
Auto Paper Selection
Paper Select

Selecting the Copy Paper Size (Paper Select)

2-9