Canon ImageRunner 5000 Series User Manual page 262

When you select the [Double] key:
Select the staple position, and press the [OK]
key.
IMPORTANT
• LGL/ LTRR/ STMTR-size paper cannot be dou-
ble-stapled.
When you select the [Saddle Stitch] key:
Press the [Next] key.
IMPORTANT
• You cannot select the [Saddle Stitch] key when the
Saddle Finisher-F2 (option) is not attached.
• LGL/ LTR/ STMTR-size paper cannot be saddle
stitched.
NOTE
• You can set the [Saddle Stitch] key when you select
the [Two-sided Printing] key. (See "Two-sided Print-
ing (Two-sided Printing)," on p. 4-67.)
• You can adjust the saddle stitch position. (See
"Changing the Saddle Stitch Position," on p. 6-33.)
Select the paper size, and press the [OK] key.
Printing a Document Stored, in a Box after Changing the Settings 4-65