Advertisement
Two-sided Copying
IMPORTANT
• In the Two-sided Mode, combined use with the Two-page Separation, Booklet, Transparency Interleaving,
Image Combination, and Image Separation modes cannot be set.
• In the Book 2-Sided mode, combined use with the Cover/Sheet Insertion, Binding Erase, Different Size
Originals, and Image Repeat modes in addition to the modes mentioned above cannot be set.
• Non-standard paper sizes cannot be used to make two-sided copies.
NOTE
• When copying with Two-sided Mode, align the top edge of the original with the back edge of the platen
glass or the feeder.
• The Two-sided Mode that you have set is displayed above the [Two-sided Mode] key in the Basic Features
screen.
• Paper used to make two-sided copies must conform to the following specifications:
- Paper size
: 11"x17"/ LGL/ LTR/ LTRR/ STMTR
- Paper weight : 17-lb bond to 110-lb index (64 g/m
There are some types of paper which may meet the above specifications, but cannot be used to make
two-sided copies.
Making Two-sided Copies from One-sided Originals (1 2-Sided)
This feature enables you to make two-sided copies from one-sided originals.
IMPORTANT
• Place the original horizontally when copying originals such as LTRR/ STMTR-size originals. If these origi-
nals are placed vertically, the back side of the copy will be printed upside down.
NOTE
• If there are an odd number of originals, the back of the last print is left blank. (The machine's counter does
not count the blank page as a copy.)
• When combined with Different Size Originals, two-sided copying cannot be performed. The different-sized
originals will be printed as one-sided copies on their respective sizes. When wanting to make copies on
both sides of the paper with different-sized originals, make sure to select the paper size you want to print
on, before printing.
2-38
Two-sided Copying (Two-sided Mode)
(Two-sided Mode)
2
Original
12-Sided
Two-sided Mode
2
to 200 g/m
)
Copy
Advertisement
Chapters
