Advertisement
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Setting a Dedicated Tray for Each Function
You can select the function for which each output tray of the Finisher-F1 (option) or the Saddle
Finisher-F2 (option) is to be used.
IMPORTANT
• This function cannot be set when the Finisher-F1 or the Saddle Finisher-F2 is not attached.
NOTE
• The default settings are as follows:
- Tray A: Copy, Printer, Other - Tray B: Copy, Printer, Other
• It is possible to assign a single tray to multiple functions.
• We recommend attaching the supplied labels to the trays for identifying their respective use.
Blank labels are also provided which you can fill out yourself.
1
Call up the desired screen as follows:
Additional Functions
key
2
Select the functions of dedicated output trays
A and B, and press the [OK] key.
NOTE
• You can select the [Printer] key only when the net-
work printer function is enabled.
• Prints of the Mail Box and Report are output as
"Other".
• When the paper reaches the stacking limit of the
tray while both trays are set as the designated tray
for a certain function, the machine automatically
changes the output tray to other available tray.
• When you want to set a tray as the designated tray
for only a certain function, select only that function.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Setting Specifications that are Common to Each Function (Common Settings)
Tray Designation
6-17
Advertisement
Chapters
