Storing/ Recalling Scanning Modes (Mode Memory) - Canon ImageRunner 5000 Series User Manual

Storing/ Recalling Scanning Modes (Mode Memory)

You can store any possible combination of the Scanning functions, up to nine settings, in a memory
key, and name that key. It is useful when you want to store the settings used frequently.
NOTE
• The scanning modes in memory will not be erased even if you turn the power OFF.
• The scanning modes you can store in memory key is Document Size Select, Scanning Exposure, Image
Quality, Copy Ratio, 2-sided Original, Document Name, Two-page Separation, Booklet Scanning, Differ-
ent Size Originals, Job Build, Nega/Posi, Sharpness, Frame Erase, and Image Combination.
Storing Scanning Modes
1
Call up the Scanning screen as follows:
Select the desired box number
MAIL BOX
NOTE
• When you select a box set with a password, enter the password after selecting the box.
2
Program the scan settings that you want to
store in the Scanning screen or Special Fea-
tures screen.
NOTE
• In the display on the right, the Nega/Posi and Job
Build modes are set.
3
Press the [Mode Memory] key.
Nega/Posi
Mode Memory
Scanning Originals into a Box 4-51