Advertisement
Entering Characters on the Touch Panel Display
At screens which require alphanumeric entry, enter characters using the alphabet keys displayed in
the touch panel display as described below.
Entering Alphabet Characters
Example: Enter "canon".
1
Press the [Entry Mode] key, and select "Alpha-
bet".
NOTE
• Each press of the [Entry Mode] key switches the
entry mode.
• If you press the [Uppercase] key, the entry mode
changes to the upper case mode, and upper case
characters can be entered.
2
Enter "canon".
NOTE
• The available modes and maximum number of let-
ters vary depending on the purpose.
• To enter a space, press the [Space] key.
• To move the cursor, press the [
• If you make a mistake when entering characters,
use the [
] or [
delete the character. Then, enter the correct char-
acter.
• You can also delete all characters you have
entered by pressing the
• To continue entering special letters, press the
[Entry Mode] key to select the desired mode. Then,
enter the character.
3
When you have entered all characters, press
the [OK] key.
10-6
Entering Characters on the Touch Panel Display
] or [
] key.
] key and the [Backspace] key to
Clear
key.
C
Advertisement
Chapters
