Advertisement
1: Counter Check key
2: Display contrast
dial
3: COPY key
4: MAIL BOX key
5: SCAN key
6: Numeric keys
7: Energy Saver key
8: Control panel
power switch
(sub power supply)
9: Stop key
10: Start key
11: Clip holder
12: Reset key
13: Guide key
14: Additional
Functions key
15: Interrupt key
16: ID key
17: Processing/Data
indicator
18: Error indicator
19: Clear key
20: Main Power indicator
Counter Check key
Display contrast dial
COPY key
MAIL BOX key
SCAN key
Numeric keys
The value of the charging counter is displayed in the touch panel.
Use to adjust the brightness of the touch panel display.
Press to use the Copy function. The Copy Basic Features screen
appears in the touch panel display.
Press to use the Mail Box function. The Box selection screen
appears in the touch panel.
Press when the function is extended.
Press to enter numerical values.
Press to place the machine in the Energy Saver mode.
Press to turn the control panel ON or OFF. When set to OFF, the
machine is in the Sleep mode.
Press to temporarily stop a scanning operation or an output
operation of the copy function.
Press to start an operation.
Place paper clips here.
Press to return the settings to the Standard mode.
Press to display explanations of modes or functions in the touch
panel display.
Press to set additional functions.
Press to interrupt a continuous copy job when you need to make
priority copies.
Press when setting the Department ID Management function.
Flashes when this machine is performing operations.
Flashes or lights when there is trouble in this machine. When the
indicator flashes, follow the message which appears in the
display. When it lights, contact your service repesentative.
Press to clear incorrectly entered values or characters.
Lights when the main power is turned ON.
Parts and Their Functions
1-5
Advertisement
Chapters
