Changing The Saddle Stitch Position - Canon ImageRunner 5000 Series User Manual

Changing the Saddle Stitch Position

When the Saddle Finisher-F2 is attached, slight position differences in the saddle stitch position
may occur. You can compensate for such differences.
IMPORTANT
• This function cannot be set when the Saddle Finisher-F2 is not attached.
1
Call up the desired screen as follows:
Additional Functions
key
2
Select the paper size for which you want to
change the saddle stitch position.
NOTE
• Some of the paper sizes displayed may not be
available in certain countries.
3
Use the [ ] and [ ] keys to adjust the saddle
stitch position, and press the [OK] key.
The setting range is from –2.0 mm to +2.0 mm, in
0.25 mm increments.
4
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Saddle Stitch Position Adjustment
The example shows adjustment for
11"x17"-size paper.
Adjusting the Machine (Adjustment/Cleaning) 6-33