Setting Automatic Collate On/ Off - Canon ImageRunner 5000 Series User Manual

Setting Automatic Collate On/ Off

This function allows automatic selection of the Collate (Offset Collate) mode when the original is
placed in the feeder. This is helpful when making multiple copies, because the user does not need
to remember to select the Finisher mode.
NOTE
• When Auto Collate is set to "On" with the Finisher (option) attached, the Offset Collate mode will be set.
Without any output option attached, the Collate mode will be set.
• The default setting is "On".
1
Call up the desired screen as follows:
Additional Functions
key
2
Select the [On] or [Off] key, and press the [OK]
key.
3
Press the [Done] key.
Repeat this until the Basic Features screen appears again.
Copy Settings
Setting Specifications of the Copy Function (Copy Settings)
Auto Collate
6-37