Communications; Is Bluetooth Available In Iss 1Play; When Having An Alarm In The Iss 1Play, Is It Possible To Receive Notifications; Is It Possible To Control Or Monitor The Ingecon Sun Ems Board With The Ingecon Sun Manager - Ingeteam INGECON SUN STORAGE 1Play Technical Manual

Battery inverter
Hide thumbs Also See for INGECON SUN STORAGE 1Play:
Table of Contents

Advertisement

3.6 Communications

3.6.1 Is Bluetooth available in ISS 1Play?

No, it is not. Bluetooth has been discontinued.

3.6.2 When having an alarm in the ISS 1Play, is it possible to receive notifications?

It is possible installing the INGECON SUN EMS Board.
3.6.3 Is it possible to control or monitor the INGECON SUN EMS Board with the Ingecon
Sun Manager?
No it is not. The INGECON SUN EMS Board must be controlled and monitored with the INGECON SUN EMS
Tools software.
3.6.4 I have a router connected to an inverter which has an Ethernet Card (AAX0004 or
AAX0054), can I remotely access to the inverter through that router?
No, it is necessary to have a Ethernet-TCP board. To access remotely to the inverter it is needed to
accomplish with the manual requirements and to configure the device properly (IP address, netmask,
gateway...).

3.7 Display, data monitoring and datalogger

3.7.1 How long can the ISS 1Play store data using the Datalogger?

The whole amount of data stored in the ISS 1Play depends on the "Monitoring Time of Datalogger (Min)"
value, setting it to 15 minutes will lead to a 4 week period of saved data. Once reached the data limit, the
oldest data will be overwritten with new data in a cyclical way, keeping always at least the last three weeks of
stored data.
Technical Guide
10/11/2017
INGECON SUN STORAGE 1Play
21/29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents