Table of Contents
Advertisement
La copia, circulación o uso de este documento o de su contenido requiere un permiso por escrito. Su in-
3.5 Storage
cumplimiento será denunciado por daños y perjuicios. Todos los derechos están reservados, incluyendo
If the unit is not installed immediately after receipt, the following points should be taken into account in
aquellos que resulten de derechos de patentes o registro del diseño.
order to prevent damage:
La correspondencia del contenido del documento con el hardware ha sido comprobada. Sin embargo,
- The package must be stored in the position in which the box arrived.
pueden existir discrepancias. No se asume ninguna responsabilidad por la concordancia total. La infor-
- Keep the unit free of dirt (dust, shavings, grease, etc) and away from rodents.
mación que contiene este documento es revisada regularmente y es posible que se produzcan cambios
- Keep away from water splashes, welding sparks, etc.
en siguientes ediciones.
- Cover the unit with a breathable protective material in order to prevent condensation due to
El presente documento es susceptible de ser cambiado.
ambient humidity.
- Neither units stored at the manufacturing plant or in the client's facilities must be subjected to
climate conditions other than those indicated in Section 3.2.5.
- It is very important to protect the unit from chemical products which can cause corrosion, as well
as from salty atmospheres.
The copy, distribution or use of this document or of its content requires written authorisation. Any
breach thereof will be reported for damages. All rights reserved including those of patent rights or
3.6 Conservation
design registration.
In order to permit correct conservation of the units, they must not be removed from their original packag-
The conformity of the document content with the hardware described has been checked. However,
ing until it is time to install them.
discrepancies may exist. Liability will not be assumed for total concordance. The information contained
In case of prolonged storage, the use of dry places avoiding, as far as possible, sharp changes in tem-
in this document is regularly revised and it is possible that there may be changes in subsequent
perature is recommended.
editions.Other functions may be available which are not covered by this document.
Damage to the packaging (cuts, holes, etc) prevents the units from being kept in optimum conditions
This document may be changed.
before installation.
INGETEAM ENERGY S.A. accepts no liability in the case of failing to observe this condition.
3.7 Waste handling
During the various processes for installation, start-up and maintenance, waste is generated which must
be handled appropriately according to the regulations in the corresponding country.
At the end of the unit's life, the waste must be processed by an authorised waste management company.
Ingeteam Energy S.A., in accordance with its policy of respect for the environment, will inform the
authorised manager, via this Section, of the location of components to be decontaminated.
The elements within the unit that must be handled individually are:
1. Electrolytic condensers or condensers containing PCB.
2. Batteries and accumulators
3. Printed circuit cards
4. Liquid crystal displays
Their location is shown in the following images.
Page 2
Page 20
20
Manual de instalación
Installation Manual
INGECON® SUN LITE
INGECON® SUN LITE
AAY2000IKH01
AAY2000IKI01
AAY2000IKH01
AAY2000IKI01
Rev. _B
Rev. _B
Fecha: Marzo 2011
Date: March 2011
Hide quick links:
Advertisement
Table of Contents
