Table of Contents
Advertisement
3.3 Handling and unpacking
Page 30
Damage during transport
Should the equipment sustain damage during transport:
1) Do not install it
2) Notify your distributor immediately of this situation, within 5 days as of
the reception date.
Should it be necessary to return the equipment to the manufacturer, the
original packaging should be used.
It is exceedingly important to correctly handle the equipment at all times in
order to ensure that:
•
The packaging remains intact and the equipment is maintained in op-
timum condition right from shipment until unpacking.
•
The equipment is not knocked and / or dropped, which could affect
the mechanical characteristics, such as poor door closure, loss of IP
rating etc.
•
Every effort is made to prevent vibrations which could lead to subse-
quent malfunctioning.
Should any anomaly be observed, please contact INGETEAM immediately.
Disposal of the packaging
All the packaging can be given to an authorised non hazardous waste
manager.
If available, each part of the packaging should be disposed of as follows:
Plastic (polystyrene, bag and bubble wrap): Plastics and containers
municipal container.
Cardboard: Paper and cardboard municipal container.
Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05
AAS2000IKI05
Date: February 2011
Rev. _
Advertisement
Table of Contents
