Configure The Behavior Analysis - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
•
Display VCA Info. on Stream: Select to display target info and rule on stream, the information will be
added to the video stream, and the overlay will be displayed if you get live view or play back with the
VS Player.
•
Target Marking Color: The frame color of human is shown as orange, the frame color of vehicle is
shown as purple.
•
Display Target Info. on Alarm Picture: Select to display the target information on the alarm picture.
•
Display Rule Info. on Alarm Picture: Select to display the rule information on the alarm picture.
•
Snapshot Settings: Select to upload the picture to the surveillance center when a VCA alarm occurs.
You can also set the picture quality.
3. Click Save.
5.2.

Configure the Behavior Analysis

This section is detailed instructions to configure behavior analysis rules.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature
Measurement+Behavior Analysis.
Steps
1. Go to Configuration → VCA → Scene Parameters to create and edit a new scene.
NOTE: Refer to Set the Scene Tracking for setting the scene tracking.
Refer to Set Rules to set the scene rules.
Refer to Set the Scene Patrol for setting scene patrol.
2. Go to Configuration → VCA Info → Overlay & Capture, enable Intelligent Analysis.
3. Click Save.
Set the Scene Tracking
Set the scene tracking function. The optical camera will track the target when the VCA rule is triggered,
which is configured on the thermal camera.
Steps
1. Go to Configuration → VCA → Scene Configuration and configure the parameters.
•
Scene Ratio: Tracking ratio of the target in the current scene. Select the channel no. and adjust it in
the PTZ control panel. The scene ratio in the optical channel and the thermal channel can be set
independently.
• Enable Track: Enable tracking the target in the scene.
UM DS-2TD6267-75C4L/W 042221NA 26