HIKVISION DS-2TD6267-75C4L/W User Manual page 24

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
source when performing auto scan, patrol, pattern, scheduled task, and park action.
•
Manual: The device stays still where it detects a fire source, until you manually move the camera.
•
Fire Source Zoom Ratio Auto: The optical channel changes its zoom ratio until the thermal channel
has the same field of view.
•
Manual: You can set the optical zoom ratio.
4. Optional: you can shield certain areas from being detected in fire source detection.
1) Go to Configuration → Event → Smart Event → Fire Source Detection Shield.
2) Check Enable Fire Source Detection Shield.
3) Click the PTZ control buttons to find the area you want to shield from fire detection.
4) Click Draw Area and drag the mouse in the live view window to draw the area. Release the mouse to
finish drawing.
5) You can drag the corners of the red rectangle area to change its shape and size, or drag the
rectangle to the position on demand.
6) Click Clear All to clear all of the areas you set without saving them.
7) Set the value of Active Zoom Ratio on demand, and the shield will appear only when the zoom ratio
is greater than the predefined value.
8) Click Add to save the fire detection shield, and it will be listed in the Fire Source Detection Shield
List area; you can select a region and click Delete to delete it from the list; you can also define the
region colors.
5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting
linkage method.
6. Click Save.
UM DS-2TD6267-75C4L/W 042221NA 24