Capture Configuration - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
Go to Configuration → Local , click Save downloaded files to to change the saving path of
NOTE:
downloaded video files.

11.3. Capture Configuration

The device can capture the pictures manually or automatically and save them in the configured saving
path. You can view and download the snapshots.
Capture Automatically
This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, configure related linkage methods in event settings. Refer to Event
and Alarm for event settings.
Steps
1. Go to Configuration → Storage → Schedule Settings → Capture → Capture Parameters.
2. Set the capture type.
• Timing: Capture a picture at the configured time interval.
•
Event-Triggered: Capture a picture when an event is triggered.
3. Set the Format, Resolution, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for configuring schedule time.
5. Click Save.
Capture Manually
Steps
1. Go to Configuration → Local.
2. Set the Image Format and saving path to for snapshots.
•
JPEG: The picture size of this format is comparatively small, which is better for network
transmission.
• BMP: The picture is compressed with good quality.
3. Click Save.
4. Click near the live view or playback window to capture a picture manually.
View and Download Picture
You can search, view, and download the pictures stored in the local storage or the network storage.
UM DS-2TD6267-75C4L/W 042221NA 70