Configure The Behavior Analysis; Set The Scene Tracking - HIKVISION DS-2TD8167-190ZE2F/W User Manual

DS-2TD8167-190ZE2F/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual
•
Display VCA Info. on Stream: Select to display target info and rule on stream, and the overlay will be
displayed if you get live view or play back with the VS Player.
•
Target Marking Color: The human frame color is orange, the vehicle frame color is purple.
•
Display Target Info. on Alarm Picture: Select to display the target information on the alarm picture.
•
Display Rule Info. on Alarm Picture: Select to display the rule information on the alarm picture.
•
Snapshot Settings: Select to upload the picture to the surveillance center when a VCA alarm occurs.
You can also set the picture quality.
3. Click Save.

5.3 Configure the Behavior Analysis

This section provides detailed instructions for configuring behavior analysis rules.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature Measurement +
Behavior Analysis.
Steps
1. Go to Configuration → VCA → Scene Parameters to create and edit a new scene.
2. Refer to Set the Scene Tracking for setting the scene tracking.
3. Refer to Set Rules to set the scene rules.
4. Refer to Set the Scene Patrol for setting scene patrol.
5. Go to Configuration → VCA Info → Overlay & Capture, enable Intelligent Analysis.
6. Click Save.
5.3.1

Set the Scene Tracking

Set the scene tracking function. The optical camera will track the target when the VCA rule is triggered,
which is configured on the thermal camera.
Steps
1. Go to Configuration → VCA → Scene Configuration and configure the parameters.
•
Scene Ratio: Tracking ratio of target in current scene. Select channel no., and adjust it in the PTZ
control panel. The scene ratio in optical channel and thermal channel can be set independently.
•
Enable Track: Enable tracking the target in the scene.
•
Tracking Duration: Set as desired, If the value is set as 0, the tracking duration will not be limited.
•
Limited Tracking: You can set the limited position for the tracking.
UM DS-2TD8167-190ZE2F/W 040521NA 26