Chapter 11 Video Recording And Picture Capture; Storage Settings - HIKVISION DS-2TD6267-75C4L/W User Manual

DS-2TD6267-75C4L/W Thermal & Optical Bi-Spectrum PTZ Network Camera User Manual

Chapter 11 Video Recording and Picture Capture

This section introduces capturing video clips and snapshots, playback, and downloading captured files.

11.1. Storage Settings

This part introduces the configuration of several common storage paths.
11.1.1 Set Memory Card
If you choose to store the files to memory card, make sure you insert and format the memory card in
advance.
Before You Start
Insert the memory card to the camera. For detailed installation, refer to the camera's
Steps
1. Go to the storage management setting page: Configuration → Storage → Storage Management → HDD
Management.
2. Select the memory card, and click Format to start initializing the memory card.
NOTE: The memory card Status turns to Normal from Uninitialized, which means the memory card
can be used normally.
3. Optional: Define the memory card Quota. Input the quota percentage for different content according to
your need.
4. Click Save.
Set NAS
Use the network server as a network disk to store record files, captured images, etc.
Before You Start
Get the IP address of the network disk.
Steps
1. Go to the NAS setting page: Configuration → Storage → Storage Management → Net HDD.
2. Click HDD No. Enter the server address and file path for the disk.
•
Server Address: The IP address of the network disk
•
File Path: The saving path of network disk files
•
Mounting Type: Select file system protocol according to the operating system
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected.
UM DS-2TD6267-75C4L/W 042221NA
Quick Start Guide
.
66